Specifications and Overview
Applicable Product: Vape-Jet Fully Automatic Cartridge Filler
Table of Contents
Product Description
The Vape Jet is an automatic vape cartridge filling machine designed for highly viscous oils, while being able to handle even the thinnest of eJuice. System operation speed, precision, repeatability, and operational range are all highly variable and dependent on the physical properties of the dispensed fluid. Every parameter of the dispensing process is software controlled and can be fine-tuned by the operator to achieve maximum throughput. The Vape Jet needs to be hardwired into your local network. The interface can be controlled from any device with a modern web browser. An API providing system status, batch metrics, and operational health is available for integration for your ERP or custom software solution.
Product Specifications
Height: 762mm
Width: 609mm
Depth: 685mm
Weight: 27kg
Technical Specifications
Electrical Specifications | |
---|---|
Input Voltage | 110V-125V |
Wattage | 200W (Idle) – 800W (Max) |
Max Amperage | 8A |
Plug | NEMA 5-15 (Type B) |
Fluid Path Specifications | |
Pump Type | Syringe Pump /w Mechanical Valve |
Pump Drive | Stepper Motor /w Optical Encoder |
Pump Speed | Adaptive variable speed dispense. Minimum 300ms dispense stroke. |
Pump Accuracy @ 30% Stroke | < .1% (Every pump is independent cal lab tested and results provided.) |
Pump Repeatability @ 30% Stroke | < .1% (Every pump is independent cal lab tested and results provided.) |
Pump Resolution | 1/6000th of 100% syringe stroke length. |
Syringe Materials | Borosilicate Glass, PTFE |
Valve Materials | Ceramic / 316 Stainless Steel |
Hose Material | PTFE |
Needle Material | 316 Stainless Steel |
Reservoir Material | 316 Stainless Steel /w Viton Gaskets |
Fittings Material | PTFE / 316 Stainless |
Injector Assembly Heater | |
Power | 150W |
Type | Resistive Cartridge Heater inside Aluminum Block |
Temp Range | 25C – 95C |
Accuracy | +- 1C |
Pump Assembly Heater | |
Power | 150W |
Type | Resistive Air Radiator Element |
Temp Range | 25C – 75C |
Accuracy | +- 5C |
Air Flow | 35CFM Max |
Reservoir Heater | |
Power | 300W |
Type | Silicone Heater Pad |
Temp Range | 25C – 95C |
Accuracy | +- .5C |
Mechanical Specifications | |
Max Travel | 360mmx410mm |
Max Speed | 150mm/second |
Repeatability / Accuracy | 0.078 / 0.091 mm |
Max Force @33mm/sec | 26lb (115N) |
Motor Type | NEMA-23 2.4A |
Operational Parameters | |
Operating Temp | 20°C ~ 35°C |
Storage Temp | 10°C ~ 45°C |
Cartridges per Hour | 300 – 1000 |
Cartridge Compatibility |
Any circular cartridge with more than .25mm alignment space after needle insertion. (CCell, 510, Etc.) |
Disclaimer
The technical specifications contained within are given in good faith and are as accurate as possible based on current testing data. Due to a continued program of improvement these specifications may change from time to time without notice. For specifications on your particular model please contact us. We apologize for any inconvenience due to changes of specification or errors and omissions within this document.
V1.0 – 1/25/2020 – Initial Release
V1.1 – 10/21/2022 – Fixed error with WiFi specifications. Machine must be hardwired.