Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

Table of Contents

Product Description

The Vape Jet is an automatic vape cartridge filling machine designed for highly viscous oils, while being able to handle even the thinnest of eJuice. System operation speed, precision, repeatability, and operational range are all highly variable and dependent on the physical properties of the dispensed fluid. Every parameter of the dispensing process is software controlled and can be fine-tuned by the operator to achieve maximum throughput. The Vape Jet is WiFi enabled or can be hardwired into your local network. The interface can be controlled from any device with a modern web browser. An API providing system status, batch metrics, and operational health is available for integration for your ERP or custom software solution.

Technical Specifications


Electrical Specifications
Input Voltage110V-125V
Wattage200W (Idle) - 800W (Max)
Max Amperage8A
PlugNEMA 5-15 (Type B)
Fluid Path Specifications
Pump TypeSyringe Pump /w Mechanical Valve
Pump DriveStepper Motor /w Optical Encoder
Pump SpeedAdaptive variable speed dispense. Minimum 300ms dispense stroke.
Pump Accuracy @ 30% Stroke< .1% (Every pump is independent cal lab tested and results provided.)
Pump Repeatability @ 30% Stroke< .1% (Every pump is independent cal lab tested and results provided.)
Pump Resolution1/6000th of 100% syringe stroke length.
Syringe MaterialsBorosilicate Glass, PTFE
Valve MaterialsCeramic / 316 Stainless Steel
Hose Material

PTFE

Needle Material316 Stainless Steel
Reservoir Material316 Stainless Steel /w Viton Gaskets
Fittings MaterialPTFE / 316 Stainless
Injector Assembly Heater
Power150W
TypeResistive Cartridge Heater inside Aluminum Block
Temp Range25C - 95C
Accuracy+- 1C
Pump Assembly Heater
Power150W
TypeResistive Air Radiator Element
Temp Range

25C - 75C

Accuracy+- 5C
Air Flow35CFM Max
Reservoir Heater
Power300W
Type

Silicone Heater Pad

Temp Range25C - 95C
Accuracy+- .5C
Mechanical Specifications
Max Travel360mmx410mm
Max Speed150mm/second
Repeatability / Accuracy0.078 / 0.091 mm
Max Force @33mm/sec26lb (115N)
Motor TypeNEMA-23 2.4A
Operational Parameters
Operating Temp20°C ~ 35°C
Storage Temp10°C ~ 45°C
Cartridges per Hour 300 – 1000
Cartridge CompatibilityAny circular cartridge with more than .25mm alignment space after needle insertion. (CCell, 510, Etc.)


Disclaimer

The technical specifications contained within are given in good faith and are as accurate as possible based on current testing data. Due to a continued program of improvement these specifications may change from time to time without notice. We apologize for any inconvenience due to changes of specification or errors and omissions within this document.