Specifications and Overview

Table of Contents

Product Description

The Vape Jet is an automatic vape cartridge filling machine designed for highly viscous oils, while being able to handle even the thinnest of eJuice. System operation speed, precision, repeatability, and operational range are all highly variable and dependent on the physical properties of the dispensed fluid. Every parameter of the dispensing process is software controlled and can be fine-tuned by the operator to achieve maximum throughput. The Vape Jet is WiFi enabled or can be hardwired into your local network. The interface can be controlled from any device with a modern web browser. An API providing system status, batch metrics, and operational health is available for integration for your ERP or custom software solution.

Technical Specifications

Electrical Specifications
Input Voltage 110V-125V
Wattage 200W (Idle) – 800W (Max)
Max Amperage 8A
Plug NEMA 5-15 (Type B)
Fluid Path Specifications
Pump Type Syringe Pump /w Mechanical Valve
Pump Drive Stepper Motor /w Optical Encoder
Pump Speed Adaptive variable speed dispense. Minimum 300ms dispense stroke.
Pump Accuracy @ 30% Stroke < .1% (Every pump is independent cal lab tested and results provided.)
Pump Repeatability @ 30% Stroke < .1% (Every pump is independent cal lab tested and results provided.)
Pump Resolution 1/6000th of 100% syringe stroke length.
Syringe Materials Borosilicate Glass, PTFE
Valve Materials Ceramic / 316 Stainless Steel
Hose Material PTFE
Needle Material 316 Stainless Steel
Reservoir Material 316 Stainless Steel /w Viton Gaskets
Fittings Material PTFE / 316 Stainless
Injector Assembly Heater
Power 150W
Type Resistive Cartridge Heater inside Aluminum Block
Temp Range 25C – 95C
Accuracy +- 1C
Pump Assembly Heater
Power 150W
Type Resistive Air Radiator Element
Temp Range 25C – 75C
Accuracy +- 5C
Air Flow 35CFM Max
Reservoir Heater
Power 300W
Type Silicone Heater Pad
Temp Range 25C – 95C
Accuracy +- .5C
Mechanical Specifications
Max Travel 360mmx410mm
Max Speed 150mm/second
Repeatability / Accuracy 0.078 / 0.091 mm
Max Force @33mm/sec 26lb (115N)
Motor Type NEMA-23 2.4A
Operational Parameters
Operating Temp 20°C ~ 35°C
Storage Temp 10°C ~ 45°C
Cartridges per Hour  300 – 1000
Cartridge Compatibility Any circular cartridge with more than .25mm alignment space after needle insertion. (CCell, 510, Etc.)

Disclaimer

The technical specifications contained within are given in good faith and are as accurate as possible based on current testing data. Due to a continued program of improvement these specifications may change from time to time without notice. We apologize for any inconvenience due to changes of specification or errors and omissions within this document.